Posey Bed safety Split Side Rail Protectors

Posey Split Side Rail Protectors feature a universal design with multiple versatile hook and loop straps for easy attachment to many beds and side rails. The soft, padded design helps protect against hard side rail surfaces and is covered in a water-repellent vinyl that can be wiped clean between uses. Provides a visual deterrent against patients exiting the bed between the side rails and depending on the bed system, these protectors may help mitigate and safeguard against FDA/HBSW entrapment zones 1 and 51. Meets CA #117, Section E Flame Residency Standards.

Posey Self-releasing Belts help reduce the risk of forward sliding and act as a reminder for patients to ask for assistance with ambulation. Posey Self-releasing Belts are not considered to be restraints as long as the individual is capable of releasing the closures themselves. The CMS definition of restraint, reference 42 CFR section 483.13 (e) states “SR (Self-releasing) belts are not considered restraints if patients are capable of releasing the belt themselves.

Features

• Wipe clean vinyl covers.
• Pads are easily secure with hook and loop straps.
• Meets CA #117, Section E Flame Residency Standards.
• The #5705LS model features both additional and longer straps for larger encapsulated side rail designs.
• Model No – 5705: For older, open bar side rail designs, 36″L x 16″H x 1/2″thick (91 cm x 41 cm x 1 cm).
• Model No -5705LS: For newer, encapsulated side rail designs, 36″L x 16″H x 1/2″ thick (91 cm x 41 cm x 1 cm) (Two more upper straps than model 5705. All four upper straps are longer than model 5705).

Monitoring: Posey Split Side Rail Protectors will not prevent a determined patient from exiting the bed, going over, or attempting to go between or through side rail gaps. DO NOT articulately bed if the product is applied. Always follow your facility’s policies and procedures for patient assessment, monitoring, and rehabilitation.

Cleaning Instructions: Wipe clean with soap and water or disinfectant. DO NOT use cleaners that contain Phenol or Benzyl.

Disposal: Properly dispose of the product per the facility’s policy for BIO HAZARDOUS materials.

Storage And Handling: This device is designed for use in normal indoor environments. This device may be stored in ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity that may damage product materials.

Application Instructions:

• Inspect the product prior to use. Do not use soiled or damaged products.
• Place the pad inside and between the upper and lower side rails of the bed with the attachment straps pointing outward (Fig. 1).
• Secure the bottom attachment straps to the bed frame. At least two of the three straps need to be secured for proper use.
• Position and attach the remaining straps to the bed side rails by (Fig. 2): A. Wrapping the loop closure completely around the attaching point; B. Pulling the hook material over the loop material; C. Excess strap length may be cut if desired.
• While not all straps may be applicable for use on some bed models, ensure that enough of the straps are attached to secure the pad on the bed (Example of a properly installed 5705 shown in Fig. 3).
• Check for proper fit. Modified beds may not be compatible with Posey Split Side Rail Protectors.